ECTS - Digital Circuits and Systems
Digital Circuits and Systems (EE203) Course Detail
| Course Name | Course Code | Season | Lecture Hours | Application Hours | Lab Hours | Credit | ECTS |
|---|---|---|---|---|---|---|---|
| Digital Circuits and Systems | EE203 | 3. Semester | 3 | 2 | 0 | 4 | 6 |
| Pre-requisite Course(s) |
|---|
| N/A |
| Course Language | English |
|---|---|
| Course Type | Compulsory Departmental Courses |
| Course Level | Bachelor’s Degree (First Cycle) |
| Mode of Delivery | Face To Face |
| Learning and Teaching Strategies | Lecture, Experiment, Problem Solving. |
| Course Lecturer(s) |
|
| Course Objectives | The aim of the course is to provide fundamental concepts used in the analysis and design of digital circuits and systems. |
| Course Learning Outcomes |
The students who succeeded in this course;
|
| Course Content | Number systems and codes, Boolean algebra and logic gates, minimization of Boolean functions, combinational circuits, design of combinational circuits using SSI and MSI components, flip-flops, analysis and design of sequential circuits, counters, shift registers, memory elements, programmable logic devices (PLD), design with PLDs. Introduction to |
Weekly Subjects and Releated Preparation Studies
| Week | Subjects | Preparation |
|---|---|---|
| 1 | Number systems, conversion between binary, decimal, octal, hexadecimal systems, negative number representations | |
| 2 | Boolean algebra, Boolean functions, logic gates, propagation delay, hazards, glitches | Read your course notes |
| 3 | Canonical and standard forms Lab. Experiment: Construction of simple combinational circuits | Read your experiment manual carefully |
| 4 | Minimization of Boolean functions, 3 and 4 variable Karnaugh map method, NAND and NOR implementations, don’t care conditions | Read the related material from your book |
| 5 | Minimization of Boolean functions, 3 and 4 variable Karnaugh map method, NAND and NOR implementations, don’t care conditions | Read the related material from your book |
| 6 | Binary adder, subtractor, decimal adder, ripple adder | |
| 7 | Definition of encoders and decoders, cascading decoders, definition of multiplexers and demultiplexers, expanding multiplexers. Combinational Programmable Logic Devices (PAL, PLA, GAL) Lab. Experiment: 4-bit ripple adder, usage of oscilloscope with logic channels, delay measurements | Review your lecture notes and read your experiment manual |
| 8 | Definition of D-latch, D-flip-flop, JK-flip-flop, T-flip-flop, master-slave configuration. Asynchronous preset and clear inputs. Analysis of synchronous sequential circuits with D-flip-flops. Finding characteristic tables, state tables and state diagrams | |
| 9 | Definition of D-latch, D-flip-flop, JK-flip-flop, T-flip-flop, master-slave configuration. Asynchronous preset and clear inputs. Analysis of synchronous sequential circuits with D-flip-flops. Finding characteristic tables, state tables and state diagrams | Read the related parts from your book |
| 10 | Design of synchronous sequential circuits with D-flip-flops | |
| 11 | Finite state machines and design examples | Study on the problems in the book |
| 12 | Ripple counter and its disadvantages, synchronous serial and parallel counters, MSI counters, shift registers. Lab. Experiment: Flip-flops and MSI counter circuits | Review your course notes |
| 13 | Introduction to memory devices: ROM, RAM, CPLDs and FPGAs | Read from your book |
| 14 | Verilog hardware description language, structural and behavioral description of combinational circuits with Verilog | Research the topic on the Internet |
| 15 | Final examination period | Review of topics |
| 16 | Final examination period | Review of topics |
Sources
| Course Book | 1. Digital Design, Author: M. Morris Mano, 5th Edition, Pearson |
|---|---|
| 2. Digital Design, Principles and Practices, Author: John F. Wakerly, Pearson International Edition, 4th Edition. |
Evaluation System
| Requirements | Number | Percentage of Grade |
|---|---|---|
| Attendance/Participation | 14 | 5 |
| Laboratory | 5 | 15 |
| Application | - | - |
| Field Work | - | - |
| Special Course Internship | - | - |
| Quizzes/Studio Critics | - | - |
| Homework Assignments | - | - |
| Presentation | - | - |
| Project | - | - |
| Report | - | - |
| Seminar | - | - |
| Midterms Exams/Midterms Jury | 2 | 40 |
| Final Exam/Final Jury | 1 | 40 |
| Toplam | 22 | 100 |
| Percentage of Semester Work | |
|---|---|
| Percentage of Final Work | 100 |
| Total | 100 |
Course Category
| Core Courses | X |
|---|---|
| Major Area Courses | |
| Supportive Courses | |
| Media and Managment Skills Courses | |
| Transferable Skill Courses |
The Relation Between Course Learning Competencies and Program Qualifications
| # | Program Qualifications / Competencies | Level of Contribution | ||||
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | ||
| 1 | Adequate knowledge in mathematics, science and engineering subjects pertaining to the relevant discipline; ability to use theoretical and applied knowledge in these areas in the solution of complex engineering problems. | X | ||||
| 2 | Ability to formulate, and solve complex mechatronics engineering problems; ability to select and apply proper analysis and modeling methods for this purpose. | X | ||||
| 3 | Ability to design a complex mechatronics engineering system, process, device or product under realistic constraints and conditions, in such a way as to meet the desired result; ability to apply modern design methods for this purpose. | X | ||||
| 4 | Ability to select and use modern techniques and tools needed for analyzing and solving complex problems encountered in mechatronics engineering and robot technology practices; ability to employ information technologies effectively. | X | ||||
| 5 | Ability to design and conduct experiments, gather data, analyze and interpret results for investigating complex mechatronics engineering and robot technology problems or research questions. | X | ||||
| 6 | Ability to work efficiently in intra-disciplinary and multi-disciplinary teams; ability to work individually. | X | ||||
| 7 | Ability to communicate effectively, both orally and in writing; knowledge of a minimum of one foreign language; ability to write effective reports and comprehend written reports, prepare design and production reports, make effective presentations, and give and receive clear and intelligible instructions. | X | ||||
| 8 | Awareness of the need for lifelong learning; ability to access information, to follow developments in science and technology, and to continue to educate him/herself | X | ||||
| 9 | a-) Knowledge on behavior according to ethical principles, professional and ethical responsibility b-) Knowledge on standards used in engineering practices. | X | ||||
| 10 | a-) Knowledge about business life practices such as project management, risk management, and change management b-) Awareness in entrepreneurship, innovation; knowledge about sustainable development. | X | ||||
| 11 | Knowledge about the global and social effects of engineering practices on health, environment, and safety, and contemporary issues of the century reflected into the field of engineering; awareness of the legal consequences of engineering solutions. | X | ||||
| 12 | Competency on defining, analyzing and surveying databases and other sources, proposing solutions based on research work and scientific results and communicate and publish numerical and conceptual solutions in the field of mechatronics engineering. | |||||
| 13 | Consciousness on the environment and social responsibility, competencies on observation, improvement and modify and implementation of projects for the society and social relations and be an individual within the society in such a way that planning, improving or changing the norms with a criticism. | |||||
ECTS/Workload Table
| Activities | Number | Duration (Hours) | Total Workload |
|---|---|---|---|
| Course Hours (Including Exam Week: 16 x Total Hours) | 16 | 3 | 48 |
| Laboratory | 5 | 1 | 5 |
| Application | |||
| Special Course Internship | |||
| Field Work | |||
| Study Hours Out of Class | 16 | 4 | 64 |
| Presentation/Seminar Prepration | |||
| Project | |||
| Report | |||
| Homework Assignments | 4 | 3 | 12 |
| Quizzes/Studio Critics | |||
| Prepration of Midterm Exams/Midterm Jury | 2 | 8 | 16 |
| Prepration of Final Exams/Final Jury | 1 | 8 | 8 |
| Total Workload | 153 | ||