SUMMER PRACTICE REPORT
(ISE 399 & 499)

GUIDELINES AND FORMAT OF THE REPORT:

  1. The report should comply with the summer practice program principles.
  2. Reports should be written in English.
  3. The metric system and standard abbreviations should be used.
  4. Tables, figures and/or appendices should be numbered consecutively and should include a short informative title.
  5. A scientific referencing system (e.g. The Harvard system) should be used in the text, and the list of references should be double-spaced.
  6. The length of the main part of the report (Introduction, Description of the company/your works, conclusion, and recommendations) should be at most 10 pages. Make sure not to exceed the page limitations, otherwise points may be deducted as a penalty.
  7. Program codes may be included in a Compact Disk.
  8. The contents and information entered should be original, and the material used should not be a copy-and-paste from other resources (i.e. Internet). The report will be rejected if it is found to include such material.
  9. Reference list should be double-spaced. Reference items should include author's name, year of publication, title of the work, title of publication, volume, number, and page numbers. Some examples are given below:

a)

Wall, J.E. (2000). "Technology-delivered assessment: diamonds or rocks?" Retrieved January 3, 2003, from http://www.universitas.edu.au/.

b)

Sweller, J., van Merrienboer, J.J.G., & Pass, F.G.W.C. (1998). "Cognitive architecture and instructional design", Educational Psychology Review, Vol.10, No.3, pp.251-296.

c)

Phillips, J.J. (1997). Handbook of training evaluation and measurement methods (3rd. Ed.) London: Gulf Publishing.

(Note the differences between referencing a book, URL, and a journal article.)

  1. The report should be typed as double space on one side of A4 sized paper. The left margin should be set to 3 cm; the remaining margins (right, top, bottom) should all be set to 2.5 cm. The text should be typeset with Times New Roman and the font size should be set to 12pt. For the main headings and sub-titles:
    • Main headings;
      Capital letters, Left aligned, Styles and Formatting as "Heading 2" (Arial, 14 pt, Bold, Italic)
    • Sub-titles;
      Small letters, Left aligned,Styles and Formatting as "Heading 3" (Arial, 13 pt, Bold)
  2. Make sure you apply "Spelling & Grammar" check before printing the report.
  3. The reports will be evaluated by two examiners, and the average score will be taken into consideration.

Successful: The average score of the examiners should be 60 or higher.

For Review / Modification: If the average score is between 40 and 59

Unsuccessful / Rejection: If the average score is below 40.

CONTENT OF THE REPORT:

 

 

 

Length( Number of pages)

1    

Title of the Summer Practice Report

 

2

Table of contents

 

3

List of Tables and Figures

 

4

Introduction
The aim and the scope of the summer practice should be briefly presented

   0.5-1

5

Description of the Company
Company name and location, organizational structure, number and duties of engineers employed, the main area and history of the business

   1-2

6

Description of the work done Include the following information:

  • Your responsibilities and duties undertaken
  • A detailed description of the works done
  • Techniques and methodologies used
  • Tools/hardware/software used
  • Technical evaluation of the results
    Etc.

   3-5

7

Conclusions and suggestions Highlight what you have learned, achieved and produced including the tools, techniques and programs used. Write your contributions, recommendations etc.

   0.5-1

8

References
Make necessary referencing to the information used.

   1

 


Total(max)=

   10

9

Appendices
All related data, tables and drawings should be given in this section

Maximum 10 pages

 



App\Announcement Object ( [casts:protected] => Array ( [start] => datetime [end] => datetime ) [connection:protected] => mysql [table:protected] => [primaryKey:protected] => id [keyType:protected] => int [incrementing] => 1 [with:protected] => Array ( ) [withCount:protected] => Array ( ) [perPage:protected] => 15 [exists] => 1 [wasRecentlyCreated] => [attributes:protected] => Array ( [id] => 6753 [site_id] => 4 [title_tr] => STAJ RAPORU YAZIM KURALLARI [title_en] => [title_ru] => [title_ar] => [content_tr] => stdClass Object ( [type] => rich_content [content] => stdClass Object ( [blocks] => Array ( [0] => stdClass Object ( [class_] => Array ( [0] => col-lg-12 [1] => col-md-12 [2] => col-sm-12 [3] => col-xs-12 ) [modules] => Array ( [0] => stdClass Object ( [type] => html [content] =>

SUMMER PRACTICE REPORT
(ISE 399 & 499)

GUIDELINES AND FORMAT OF THE REPORT:

  1. The report should comply with the summer practice program principles.
  2. Reports should be written in English.
  3. The metric system and standard abbreviations should be used.
  4. Tables, figures and/or appendices should be numbered consecutively and should include a short informative title.
  5. A scientific referencing system (e.g. The Harvard system) should be used in the text, and the list of references should be double-spaced.
  6. The length of the main part of the report (Introduction, Description of the company/your works, conclusion, and recommendations) should be at most 10 pages. Make sure not to exceed the page limitations, otherwise points may be deducted as a penalty.
  7. Program codes may be included in a Compact Disk.
  8. The contents and information entered should be original, and the material used should not be a copy-and-paste from other resources (i.e. Internet). The report will be rejected if it is found to include such material.
  9. Reference list should be double-spaced. Reference items should include author's name, year of publication, title of the work, title of publication, volume, number, and page numbers. Some examples are given below:

a)

Wall, J.E. (2000). "Technology-delivered assessment: diamonds or rocks?" Retrieved January 3, 2003, from http://www.universitas.edu.au/.

b)

Sweller, J., van Merrienboer, J.J.G., & Pass, F.G.W.C. (1998). "Cognitive architecture and instructional design", Educational Psychology Review, Vol.10, No.3, pp.251-296.

c)

Phillips, J.J. (1997). Handbook of training evaluation and measurement methods (3rd. Ed.) London: Gulf Publishing.

(Note the differences between referencing a book, URL, and a journal article.)

  1. The report should be typed as double space on one side of A4 sized paper. The left margin should be set to 3 cm; the remaining margins (right, top, bottom) should all be set to 2.5 cm. The text should be typeset with Times New Roman and the font size should be set to 12pt. For the main headings and sub-titles:
    • Main headings;
      Capital letters, Left aligned, Styles and Formatting as "Heading 2" (Arial, 14 pt, Bold, Italic)
    • Sub-titles;
      Small letters, Left aligned,Styles and Formatting as "Heading 3" (Arial, 13 pt, Bold)
  2. Make sure you apply "Spelling & Grammar" check before printing the report.
  3. The reports will be evaluated by two examiners, and the average score will be taken into consideration.

Successful: The average score of the examiners should be 60 or higher.

For Review / Modification: If the average score is between 40 and 59

Unsuccessful / Rejection: If the average score is below 40.

CONTENT OF THE REPORT:

 

 

 

Length( Number of pages)

1    

Title of the Summer Practice Report

 

2

Table of contents

 

3

List of Tables and Figures

 

4

Introduction
The aim and the scope of the summer practice should be briefly presented

   0.5-1

5

Description of the Company
Company name and location, organizational structure, number and duties of engineers employed, the main area and history of the business

   1-2

6

Description of the work done Include the following information:

  • Your responsibilities and duties undertaken
  • A detailed description of the works done
  • Techniques and methodologies used
  • Tools/hardware/software used
  • Technical evaluation of the results
    Etc.

   3-5

7

Conclusions and suggestions Highlight what you have learned, achieved and produced including the tools, techniques and programs used. Write your contributions, recommendations etc.

   0.5-1

8

References
Make necessary referencing to the information used.

   1

 


Total(max)=

   10

9

Appendices
All related data, tables and drawings should be given in this section

Maximum 10 pages

 

) ) ) ) ) ) [content_en] => [content_ru] => [content_ar] => [gallery] => stdClass Object ( [initialPreview] => Array ( [0] => /assets/img/duyurular.jpg ) [initialPreviewConfig] => Array ( [0] => stdClass Object *RECURSION* ) [target_url] => /assets/img/duyurular.jpg ) [start] => 2019-07-04 14:27:29 [end] => 2019-07-04 14:27:31 [meta_desc_tr] => [meta_desc_en] => [meta_desc_ru] => [meta_desc_ar] => [keywords_tr] => [keywords_en] => [keywords_ru] => [keywords_ar] => [created_at] => 2019-07-04 11:30:19 [updated_at] => 2019-07-04 11:33:54 [short_desc_tr] => [short_desc_en] => [short_desc_ru] => [short_desc_ar] => [status] => 1 [featured] => 0 [media_dir] => staj-raporu-yazim-kurallari-1562239819 [old_url] => [breadcrumb] => Array ( [sites] => Array ( [0] => Array ( [id] => 2 [name_tr] => Mühendislik Fakültesi [url] => foe [type] => ) [1] => Array ( [id] => 4 [name_tr] => Bilişim Sistemleri Mühendisliği [url] => ise [type] => ) ) ) [user] => [hide_side_menu] => ) [original:protected] => Array ( [id] => 6753 [site_id] => 4 [title_tr] => STAJ RAPORU YAZIM KURALLARI [title_en] => [title_ru] => [title_ar] => [content_tr] => {"type":"rich_content","content":{"blocks":[{"class_":["col-lg-12","col-md-12","col-sm-12","col-xs-12"],"modules":[{"type":"html","content":"

SUMMER PRACTICE REPORT
\n(ISE 399 & 499) <\/strong><\/p>\n\n

GUIDELINES AND FORMAT OF THE REPORT:<\/strong><\/p>\n\n

    \n\t
  1. The report should comply with the summer practice program principles.<\/li>\n\t
  2. Reports should be written in English.<\/li>\n\t
  3. The metric system and standard abbreviations should be used.<\/li>\n\t
  4. Tables, figures and\/or appendices should be numbered consecutively and should include a short informative title.<\/li>\n\t
  5. A scientific referencing system (e.g. The Harvard system) should be used in the text, and the list of references should be double-spaced.<\/li>\n\t
  6. The length of the main part of the report (Introduction, Description of the company\/your works, conclusion, and recommendations) should be at most 10 pages. Make sure not to exceed the page limitations, otherwise points may be deducted as a penalty.<\/li>\n\t
  7. Program codes may be included in a Compact Disk.<\/li>\n\t
  8. The contents and information entered should be original, and the material used should not be a copy-and-paste from other resources (i.e. Internet). The report will be rejected if it is found to include such material.<\/li>\n\t
  9. Reference list should be double-spaced. Reference items should include author's name, year of publication, title of the work, title of publication, volume, number, and page numbers. Some examples are given below:<\/li>\n<\/ol>\n\n

    a)<\/p>\n\n

    Wall, J.E. (2000). "Technology-delivered assessment: diamonds or rocks?" Retrieved January 3, 2003, from http:\/\/www.universitas.edu.au\/.<\/p>\n\n

    b)<\/p>\n\n

    Sweller, J., van Merrienboer, J.J.G., & Pass, F.G.W.C. (1998). "Cognitive architecture and instructional design", Educational Psychology Review, Vol.10, No.3, pp.251-296.<\/p>\n\n

    c)<\/p>\n\n

    Phillips, J.J. (1997). Handbook of training evaluation and measurement methods (3rd. Ed.) London: Gulf Publishing.<\/p>\n\n

    (Note the differences between referencing a book, URL, and a journal article.)<\/p>\n\n

      \n\t
    1. The report should be typed as double space on one side of A4 sized paper. The left margin should be set to 3 cm; the remaining margins (right, top, bottom) should all be set to 2.5 cm. The text should be typeset with Times New Roman and the font size should be set to 12pt. For the main headings and sub-titles:\n\t