VLSI Design (CMPE437) Course Detail

Course Name	Course Code	Season	Lecture Hours	Application Hours	Lab Hours	Credit	ECTS
VLSI Design	CMPE437	Area Elective	2	2	0	3	5

Pre-requisite Course(s)
EE203

Course Language	English
Course Type	Elective Courses
Course Level	Bachelor’s Degree (First Cycle)
Mode of Delivery	Face To Face
Learning and Teaching Strategies	Lecture.
Course Coordinator
Course Lecturer(s)
Course Assistants
Course Objectives	The objective of this course is to teach the VLSI design techniques, and CMOS technology. In this course, structured design, design rules and layout procedures, using CAD tools for VLSI design (layout, design rule checking, logic and circuit simulation), and some design issues like power, reliability, speed, and economics will be discussed.
Course Learning Outcomes	The students who succeeded in this course; Design combinational, sequential, and arithmetic circuits using CMOS transistors Design both static and dynamic CMOS circuits Review the performance metrics of CMOS circuits, evaluate and optimize the designed circuits Perform transistor-level (SPICE) simulation to verify and evaluate the designed circuits Perform layout design for CMOS circuits Explain modern IC Layout design techniques, including Design Rule Check (DRC), Electrical Rule Check (ERC), Layout Versus Schematic (LVS), and layout parasitic extraction Discuss the challenges in high-speed digital VLSI design and describe the common techniques to improve circuit clock frequency and avoid timing violation problems Recognize the circuit structures of static and dynamic random access memories Explain basic I/O buffers and ESD circuits Discuss the challenges and circuit techniques in high-speed interconnect design
Course Content	Basic fabrication sequence of ICs, self aligned silicon gate, NMOS and CMOS technologies; design rules and layout; memories and registers; full custom and semi-custom ICs; standard cells, gate arrays, FPGAs and PLDs. CAD tools for design of ICs; high level design of ICs using VHDL; low power IC design.

Weekly Subjects and Releated Preparation Studies

Week	Subjects	Preparation
1	Introduction to IC Technology	Chapter 1 (main text)
2	Basic Electrical Properties of MOS and BiCMOS Circuits	Chapter 2
3	VLSI Design Flow, MOS Layers, Stick Diagrams	Chapter 3
4	VLSI Design Flow, MOS Layers, Design Rules and Layout	Chapter 3
5	Logic Gates and Other complex gates	Chapter 4
6	Logic Gates and Other complex gates	Chapter 4
7	Subsystem Design, Shifters, Adders, ALUs, Multipliers	Chapter 5
8	Parity generators, Comparators, Zero/One Detectors, Counters, High Density Memory Elements	Chapter 5
9	Semiconductor Integrated Circuit Design : PLAs, FPGAs, CPLDs	Chapter 6
10	Standard Cells, Programmable Array Logic, Design Approach.	Chapter 6
11	VHDL Synthesis, Circuit Design Flow, Circuit Synthesis, Simulation	Chapter 7
12	Layout, Design capture tools, Design Verification Tools, Test Principles	Chapter 7
13	CMOS Testing, Need for testing, Test Principles, Design Strategies for test	Chapter 8
14	Chip level Test Techniques, System-level Test Techniques, Layout Design for improved Testability	Chapter 8

Sources

Course Book	1. Essential VLSI Circuits and Systems, Pucknell, D.A. & Eshraghian, S., Prentice Hall, 2005.
Other Sources	2. 1. Digital Integrated Circuits: A Design Perspective, Jan M. Rabaey, Prentice Hall, 1st edition, 1995
	3. 2. CMOS Digital Integrated Circuits: Analysis and Design, S.-M. Kang and Y. Leblebici, McGraw-Hill, 2003
	4. 3. Principles of CMOS VLSI Design. A Systems Perspective with VERILOG, N.H.Weste, K. Eshraghian., Addison-Wesley, 2002
	5. 4. Modern VSLI Design a System Approach, W. Wolf, Prentice-Hall, 3 edition, 2002
	6. 5. Introductory VHDL, By Yalamanchili, Prentice Hall, 2000

Evaluation System

Requirements	Number	Percentage of Grade
Attendance/Participation	1	5
Laboratory	-	-
Application	-	-
Field Work	-	-
Special Course Internship	-	-
Quizzes/Studio Critics	-	-
Homework Assignments	2	20
Presentation	-	-
Project	-	-
Report	-	-
Seminar	-	-
Midterms Exams/Midterms Jury	2	40
Final Exam/Final Jury	1	35
Toplam	6	100

Percentage of Semester Work	65
Percentage of Final Work	35
Total	100

Course Category

Core Courses	X
Major Area Courses
Supportive Courses
Media and Managment Skills Courses
Transferable Skill Courses

The Relation Between Course Learning Competencies and Program Qualifications

#	Program Qualifications / Competencies	Level of Contribution
#	Program Qualifications / Competencies	1	2	3	4	5
1	Gain sufficient knowledge in mathematics, science and computing; be able to use theoretical and applied knowledge in these areas to solve engineering problems related to information systems.			X
2	To be able to identify, define, formulate and solve complex engineering problems; to be able to select and apply appropriate analysis and modeling methods for this purpose.
3	Designs a complex system, process, device or product under realistic constraints and conditions to meet specific requirements; applies modern design methods for this purpose.
4	To be able to develop, select and use modern techniques and tools required for the analysis and solution of complex problems encountered in information systems engineering applications; to be able to use information technologies effectively.
5	Designs and conducts experiments, collects data, analyzes and interprets results to investigate complex engineering problems or research topics specific to the discipline of information systems engineering.
6	Can work effectively in disciplinary and multidisciplinary teams; can work individually.
7	a. Communicates effectively both orally and in writing; writes effective reports and understands written reports, prepares design and production reports, makes effective presentations, gives and receives clear and understandable instructions. b. Knows at least one foreign language.
8	To be aware of the necessity of lifelong learning; to be able to access information, to be able to follow developments in science and technology and to be able to renew himself/herself continuously.
9	a. Acts in accordance with the principles of ethics, gains awareness of professional and ethical responsibility. b. Gains knowledge about the standards used in information systems engineering applications.
10	a. Gains knowledge about business life practices such as project management, risk management and change management. b. Gains awareness about entrepreneurship and innovation. c. Gains knowledge about sustainable development.
11	a. To be able to acquire knowledge about the universal and social effects of information systems engineering applications on health, environment and safety and the problems of the era reflected in the field of engineering. b. Gains awareness of the legal consequences of engineering solutions.

ECTS/Workload Table

Activities	Number	Duration (Hours)	Total Workload
Course Hours (Including Exam Week: 16 x Total Hours)	16	4	64
Laboratory
Application
Special Course Internship
Field Work
Study Hours Out of Class	16	1	16
Presentation/Seminar Prepration
Project
Report
Homework Assignments	2	5	10
Quizzes/Studio Critics
Prepration of Midterm Exams/Midterm Jury	2	10	20
Prepration of Final Exams/Final Jury	1	15	15
Total Workload			125