Dynamics of Machinery (ME426) Course Detail

Course Name	Course Code	Season	Lecture Hours	Application Hours	Lab Hours	Credit	ECTS
Dynamics of Machinery	ME426		3	0	0	3	5

Pre-requisite Course(s)
MECE 303 Theory of Machines

Course Language	English
Course Type	N/A
Course Level	Natural & Applied Sciences Master's Degree
Mode of Delivery	Face To Face
Learning and Teaching Strategies	Lecture, Question and Answer, Problem Solving.
Course Coordinator
Course Lecturer(s)	Instructor Dr. Behzat B Kentel
Course Assistants
Course Objectives	To develop an ability • to perform motion analysis of single degree of freedom mechanisms, • to perform dynamic force analysis in mechanisms including the effect of friction • to perform balancing in rotating machinery and inertia variant machines
Course Learning Outcomes	The students who succeeded in this course; construct the equation of motion of single degree of freedom mechanisms using kinematic influence coefficients and apply numerical methods to solve for equation of motion perform force analysis in mechanisms including the effects of friction at prismatic and revolute joints perform force analysis in simple and planetary gear trains and construct power flow diagrams perform balancing of rotating machinery, design counterweights to obtain completely-balanced in-line four-bar mechanisms and reduce shaking forces and moments of in-line multi-cylinder engines
Course Content	Knematic influence coefficients, equation of motion of single degree of freedom systems, analytical and numerical solution methods, effects of dry and viscous friction, force analysis and power flow in simple and planetary gear trains, rotating mass balancing, balancing of inertia-variant machines, analysis of unbalance in multi-cylinder engines

Weekly Subjects and Releated Preparation Studies

Week	Subjects	Preparation
1	Introduction and review of mechanisms	Review of MECE 303 topics
2	Kinematic influence coefficients
3	Kinematic influence coefficients; equation of motion for single degree of freedom mechanisms
4	Equation of motion for single degree of freedom mechanisms
5	Numerical solution of equation of motion	Review of MATH 380 topics
6	General considerations on dynamics of single degree of freedom mechanisms; speed fluctuation and flywheels
7	Speed fluctuation and flywheels
8	Mode of contact at prismatic joints; effects of friction at prismatic joints
9	Effects of friction at prismatic joints
10	Effects of friction at revolute joints
11	Force analysis in simple and planetary gear trains
12	Rotating mass balancing
13	Balancing of inertia variant machines; balancing of a four bar mechanism
14	Reciprocating engines; analysis of unbalance for in-line reciprocating engines

Sources

Other Sources	1. Kinematics and Dynamics of Machinery; R.L. Norton, 1st Ed. In SI units, McGraw-Hill, 2009
	2. Theory of Machines and Mechanisms; J.J. Uicker, G.R. Pennock, J.E. Shigley, 5th Ed., Oxford University Press, 2016
	3. Notes on Dynamics of Machinery; E.Söylemez, T.Tümer, N. Özgüven, K. Özgören, METU Mechanical Engineering Department, 1984

Evaluation System

Requirements	Number	Percentage of Grade
Attendance/Participation	-	-
Laboratory	-	-
Application	-	-
Field Work	-	-
Special Course Internship	-	-
Quizzes/Studio Critics	-	-
Homework Assignments	3	10
Presentation	-	-
Project	1	15
Report	-	-
Seminar	-	-
Midterms Exams/Midterms Jury	2	40
Final Exam/Final Jury	1	35
Toplam	7	100

Percentage of Semester Work
Percentage of Final Work	100
Total	100

Course Category

Core Courses	X
Major Area Courses
Supportive Courses
Media and Managment Skills Courses
Transferable Skill Courses

The Relation Between Course Learning Competencies and Program Qualifications

#	Program Qualifications / Competencies	Level of Contribution
#	Program Qualifications / Competencies	1	2	3	4	5
1	An ability to apply advanced knowledge in computational and/or manufacturing technologies to solve manufacturing engineering problems .
2	An ability to define and analyze issues related with manufacturing technologies.
3	An ability to develop a solution based approach and a model for an engineering problem and design and manage an experiment.
4	An ability to design a comprehensive manufacturing system based on creative utilization of fundamental engineering principles while fulfilling sustainability in environment and manufacturability and economic constraints.
5	An ability to chose and use modern technologies and engineering tools for manufacturing engineering applications.
6	Ability to perform scientific research and/or carry out innovative projects that are within the scope of manufacturing engineering.
7	An ability to utilize information technologies efficiently to acquire datum and analyze critically, articulate the outcome and make decision accordingly.
8	An ability to attain self-confidence and necessary organizational work skills to participate in multi-diciplinary and interdiciplinary teams as well as act individually.
9	An ability to attain efficient communication skills in Turkish and English both verbally and orally.
10	An ability to reach knowledge and to attain life-long learning and self-improvement skills, to follow recent advances in science and technology.
11	An awareness and responsibility about professional, legal, ethical and social issues in manufacturing engineering.
12	An awareness about solution focused project and risk management, enterpreneurship, innovative and sustainable development.
13	An understanding on the effects of engineering applications on health, social and legal aspects at universal and local level during decision making process.

ECTS/Workload Table

Activities	Number	Duration (Hours)	Total Workload
Course Hours (Including Exam Week: 16 x Total Hours)	14	3	42
Laboratory
Application
Special Course Internship
Field Work
Study Hours Out of Class	14	1	14
Presentation/Seminar Prepration
Project	1	20	20
Report
Homework Assignments	3	3	9
Quizzes/Studio Critics
Prepration of Midterm Exams/Midterm Jury	2	10	20
Prepration of Final Exams/Final Jury	1	15	15
Total Workload			120