Compulsory Departmental Courses

AE307 - Fluid Mechanics (3 + 1) 6

Introduction to basic concepts of fluid mechanics; properties of fluids; pressure and fluid statics, fluid kinematics, Bernoulli and energy equations, momentum analysis of flow systems, dimensional analysis and modeling, internal flow, external flow ? drag and lift.

ASE-AE4FA1 - Departmental Elective (0 + 0) 5

ASE-AE4FA2 - Departmental Elective (0 + 0) 5

ASE-AE4SP1 - Departmental Elective (0 + 0) 5

ASE-AE4SP2 - Departmental Elective (0 + 0) 5

ASE-AE4SP3-Çokdisiplinli Dersler - Departmental Elective (0 + 0) 5

ASE-AE4SP3-Çokdisiplinli Dersler - Departmental Elective (0 + 0) 5

ASE-AE4SP3-Çokdisiplinli Dersler - Departmental Elective (0 + 0) 5

ASE-AE4SP3-ÇokdisiplinliDersler - Departmental Elective (0 + 0) 5

ASE-GE2FA1 - Non-Departmental Elective (0 + 0) 4

ASE-GE2SP1 - Non-Departmental Elective (0 + 0) 4

ASE-GE3FA1-Girişimcilik Havuzu - Non-Departmental Elective (0 + 0) 4

ASE-GE3FA1-GirişimcilikHavuzu - Non-Departmental Elective (0 + 0) 4

ASE101 - Introduction to Aerospace Engineering (2 + 0) 2

Aerospace engineering history, interest topics and relationships with other engineering disciplines; aerospace engineering in Turkey, and expectations fromaerospace engineers; industrial developments; air vehicle types; Atılım University Aerospace Engineering Department, academic personnel, curricula, internships, research topics, and regulations.

ASE102 - Introduction to Aircraft Performance (2 + 2) 4.5

Basic components and functions of aircraft; forces and moments acting on aircraft, aerodynamics; performance: equations of motion, horizontal flight, climb performance, takeoff performance, gliding, descent and landing performance, range and endurance, flight envelope, V-n diagram; longitudinal static stability, aerodynamic center, criterion for longitudinal static stability, static margin, unstable aircraft.

ASE301 - Applied Elasticity (3 + 1) 5

Generalized theory of pure bending and shear stresses; shear center; torsion of non-circular beams; concepts of stress and strain in 3-D; generalized Hooke`s Law; plane-stress and plane-strain problems; stress concentrations, thermal stresses; axisymmetric problems; aerospace applications.

ASE302 - Aerospace Structures (3 + 1) 5

Aerospace materials, airworthiness, air vehicle structural loads, thin walled stiffened open section and closed section beams bending, torsion and shear analyses; structural idealization; stress analyses for airplane structures; experimental stress analysis.

ASE304 - Aerodynamics I (3 + 2) 6

Potential flow theory, complex potential, flow around cylinder, lift, aerodynamic parameters; thin airfoil theory, Kutta condition, Kelvin?s circulation theorem, symmetric and cambered airfoils; finite wing theory.

ASE306 - Propulsion Systems I (3 + 1) 5

Introduction to propulsion systems; aerothermodynamics of propulsion systems; Carnot, Brayton, Otto cycles; mixtures, combustion; equilibrium and dissociation; reciprocating engines; rocket engines; ideal engine cycle analysis.

ASE308 - Flight Mechanics (3 + 1) 6

Reference frames, coordinate systems and transformations, notations; longitudinal static stability and control; maneuverability; lateral, directional static stability and control; stability derivatives; stability of uncontrolled motion.

ASE399 - Summer Practice I (0 + 0) 6

Students are expected to work at manufacturing, maintenance, quality control or research and development departments at a firm preferentially in Aerospace Industry during 20 working days; in addition, students are required to present their work with a report.

ASE401 - Aerospace Engineering Design (3 + 1) 7

Conceptual design of fixed wing aircraft; aircraft sizing; airfoil and geometry selection; thrust to weight ratio and wing loading; configuration layout; propulsion and fuel systems integration; landing gear and subsystems; aerodynamics, stability, performance and flight mechanics; cost analysis.

ASE402 - Design Project (1 + 4) 8

Conceptual or applied design projects from different areas of Aerospace Engineering which shall be studied with a team.

ASE405 - Aerodynamics II (3 + 2) 6

Compressible air flow, governing equations for inviscid compressible flow, normal and oblique shock waves, Prandtl Meyer expansion waves, linearized theory; viscous air flow, Navier Stokes equations, boundary layer simplifications, two dimensional boundary layer equations, similarity solutions, Blassius solution, integral methods, effects of pressure gradient, laminar and turbulent flow, transition and turbulence, law of the wall.

ASE407 - Propulsion Systems II (3 + 1) 5

Aerothermodynamic performance of aircraft engines; non-ideal cycle analysis of turbojet, turbofan and turboprop engines; loading characteristics of axial and radial compressors and turbines; performance of non-rotating components: inlets, nozzles and combustion chambers.

ASE499 - Summer Practice II (0 + 0) 6

Students are expected to work at management department of a firm preferentially in Aerospace Industry during 20 working days; in addition, students are required to present their work and gained experience with a report.

CHE105 - General Chemistry (3 + 2) 5

Matter and measurement, atoms, molecules and ions, stoichiometry: calculations with chemical formulas and equations, oxidation-reduction reactions, thermochemistry, electronic structure of atoms, periodic properties of the elements, basic concepts of chemical bonding, molecular geometry and bonding theories, gases, intermolecular forces, liquids and solids, chemical kinetics, chemical thermodynamics, electrochemistry.

CMPE102 - Computer Programming (2 + 2) 4

The objective of this course is to provide the basics of programming concepts using Python programming language and enable students to gain experience in laboratory environment.

EE234 - Introduction to Electrical Engineering (3 + 1) 5

Definition of current, voltage, resistance, power, Kirchoff laws and resistive DC circuits, Thevenin and Norton equivalents, AC circuits, phasors, filters, reactive power, three-phase circuits and power, overview of combinational and sequential digital circuits and examples, diodes and transistors.

ENE203 - Thermodynamics I (3 + 0) 6

Basic concepts and definitions, properties of a pure substance, equations of state, work and heat interactions, first law of thermodynamics, internal energy and enthalpy, second law of thermodynamics, entropy, reversible and irreversible processes, thermodynamic analysis of processes, third law of thermodynamics.

ENE301 - Heat Transfer (3 + 1) 6

Basic concepts of heat transfer; mechanisms of heat transfer (conduction, convection, radiation).

ENG101 - English For Academic Purposes I (4 + 0) 3.5

English language skills, especially academic skills, such as reading comprehension, vocabulary building and critical analysis of texts; listening and note-taking, class discussions, presentations, writing, research assignments and use of technology.

ENG102 - English for Academic Purposes II (4 + 0) 3.5

Academic skills such as reading comprehension, class discussions, use of academic vocabulary and critical analysis of texts; research assignments and review of the English language structure; skills such as listening and note-taking, analysis of written products, writing, presentation and use of technology.

ENG201 - English for Academic Purposes III (3 + 0) 3

Advanced reading and writing skills, applying critical reading skills and strategies, identifying the organization of a reading text, main ideas of the texts, and the author?s main purpose, summarizing a given text, outlining and writing an argumentative essay.

ENG202 - English for Academic Purposes IV (3 + 0) 3

Preparing and writing research reports and delivering effective oral/written informative and persuasive presentations; gathering information, organizing data, outlining, using appropriate techniques in presentation and delivering for a maximum impact, using visual aids and citation effectively.

ENG301 - English for Occupational Purposes I (3 + 0) 3

Job-related communication skills;the functions such as describing relationships at work,discussing performance reviews and giving feedback,discussing plans and arrangements,using social media for professional communication,discussing on recruitment tests and job interviews,presenting a service or product,writing reviews on websites

ENG302 - English for Occupational Purposes II (3 + 0) 3

More detailed job-related communication skills;describing and organising meetings,developing communicational styles in various cultural settings,handling mistakes and apologizing,getting familiar with marketing styles and advertising,deciding how to adapt and market a product in different countries,

HIST111 - Principles of Atatürk and History of Turkish Revolution I (in English) (2 + 0) 2

French Revolution; structure and geopolitic positioning of Ottoman Empire, reasons of its decline; Westernization movements, First and Second Constitutional Monarchy declarations; Libya and Balkan wars; First World War; period before the War of Independence, congresses, National Pact, establishment of Turkish Grand National Assembly.

HIST112 - Principles of Atatürk and History of Turkish Revolution II (in English) (2 + 0) 2

War of Independence; Lausanne Treaty; declaration of the Republic; removal of sultanic rule and caliphate; Atatürk`s revolutions; establishment of national economy; Second World War, before and after; Turkish Republic after 1960.

HIST221 - History of Civilization (3 + 0) 3

A chronological order of the rise of civilizations from Sumer until the Scientific Revolution.

KRY111 - Career Planning (1 + 0) 1

Being a student at Atilim University, Student-centered programs at Atilim University, Faculty, Department presentations, Career Planning and Coop Program, Erasmus, CV writing types, Interview techniques, Effective Communication and presentation techniques, Intelligence and Personality

MATE207 - Introduction to Materials Engineering (3 + 0) 5

Historical perspective and classification of materials; atomic structure and theory; bonding in solids; the structure of crystalline solids; fundamental mechanical properties of materials; phase diagrams; thermal processing of metal alloys; properties and use of ceramics, glasses and composites; material selection; design and economical considerati

MATH151 - Calculus I (4 + 2) 7

Preliminaries, limits and continuity, differentiation, applications of derivatives, L`Hopital's Rule, integration, applications of integrals, integrals and transcendental functions, integration techniques and improper integrals, squences.

MATH152 - Calculus II (4 + 2) 7

Infinite series, vectors in the plane and polar coordinates, vectors and motions in space, multivariable functions and their derivatives, multiple integrals: double integrals, areas, double integrals in polar coordinates, triple integrals in rectangular, cylindrical and spherical coordinates, line integrals, Independence of path,Green's theorem.

MATH275 - Linear Algebra (4 + 0) 6

Linear equations and matrices, real vector spaces, inner product spaces, linear transformations and matrices, determinants, eigenvalues and eigenvectors.

MATH276 - Differential Equations (4 + 0) 6

First-order, higher-order linear ordinary differential equations, series solutions of differential equations, Laplace transforms, linear systems of ordinary differential equations, Fourier analysis and partial differential equations.

MATH380 - Numerical Methods for Engineers (3 + 1) 5

Solution of nonlinear equations, solution of linear systems, eigenvalues and eigenvectors, interpolation and polynomial approximation, least square approximation, numerical differentiation, numerical integration.

ME108 - Computer Aided Solid Modeling (1 + 3) 4.5

Part design and principles of surface design, drafting of part design, fundamental concepts of dimensioning and tolerances, fundamentals of assembly design and bill of materials.

ME201 - Statics (3 + 0) 6

Genel tanıtım, parçacıkların statiği, rijit cisimlerin statiği, eşdeğer kuvvet sistemleri, denge, makasların analizi, kirişlerin analizi, sürtünme ve yüzeylerin geometrik özellikleri.

ME210 - Strength of Materials (3 + 1) 6

Concepts of normal and shear stress, strain, axial load, statically indeterminate axially loaded members, torsion, statically indeterminate torque-loaded members, bending of beams, combined loadings, stress and strain transformation, simple loading tension, torsion and bending, deflections with simple loadings, superposition techniques.

ME425 - Mechanical Vibrations (3 + 0) 5

Temel tanımlar, tek serbestlik dereceli sistemler, titreşim yalıtımı, iki serbestlik dereceli sistemler: hareket denklemleri, koordinat dönüşümleri, temel koordinatlar, titreşim modları, torsiyonel titreşim, çoklu serbestlik dereceli sistemler, koordinat dönüşümler ve normal koordinatlar, modal analiz, harmonik zorlamalı sistemlerin çözümü.

MECE204 - Dynamics (2 + 2) 6

Particles and rigid bodies with respect to planar motions; kinematics and kinetics, methods of Newton?s second law, work energy and impulse-momentum.

MECE306 - Control Systems I (3 + 0) 6

Design of continuous time control systems, discretizing the systems and controllers, implementing the closed loop system and analyzing and interpreting the results; Laplace transform, transfer functions, stability, steady-state error analysis, root-locus technique, frequency response.

PHYS101 - General Physics I (3 + 2) 6

Measurement, motion along a straight line, vectors, motion in two and three dimensions, force and motion I, force and motion II, kinetic energy and work, potential energy and conservation of energy, center of mass and linear momentum, rotation, rolling, torque, and angular momentum, equilibrium and elasticity.

PHYS102 - General Physics II (3 + 2) 6

Electric charge, electric fields, Gauss` law, electric potential, capacitance, current and resistance, circuits, magnetic fields, magnetic fields due to currents, induction and inductance.

TURK401 - Turkish Language I (2 + 0) 2

Languages and their classification; history of Turkish language, its spread over the world and its place among other languages; Turkish language in the republic era; orthography; expressions; foreign words, suffixes and prefixes; punctuation; language and verbalism.

TURK402 - Turkish Language II (2 + 0) 2

Written expression and its genres; bibliography; sentence structure and types; misexpression; verbal expressions.

Elective Courses

AE434 - Electric and Hybrid Vehicles (3 + 1) 5

Electric vehicle components; history of electric vehicles; types of electric vehicles; batteries and battery modeling; alternative energy sources and stores (photovoltaics, flywheels, capacitors, fuel cells); DC and AC electric motors, brushed DC motors, and brushless electric motors; power electronics and motor drives; electric vehicle drivetrain.

ART201 - Introduction to Photography (3 + 0) 4

Definition of photography and the photographer, the uses of photography in life, camera and its parts (aperture, iso, shutter, lens), light and its use in photography, composition rules in photography, the works of photographers from the world and Turkey.

ART202 - Cartoon (3 + 0) 4

Basic information on cartoon; drawing techniques using simple rules; humor; career-oriented cartoon work.

ART221 - Annotated History of Music (3 + 0) 4

The evolution of music in history of humanity; music in the process of becoming an art, the authencities of music; the historical analysis of music, information exchange as well as the main distinctions between art and other cultural domains.

ART222 - History of Jazz (3 + 0) 4

The history of music before 1900`s; Blues and Ragtime music genres; the impacts of musical, social and cultural structures of jazz music in New Orleans before its emergence in the region; main jazz movements starting from the very first Dixieland music to Fusion jazz movement today.

ART223 - Performing Jazz (3 + 0) 4

Human voice in terms of its anatomy, physiology and its techniques.

ART224 - History of Argentine Tango (3 + 0) 4

Where does the tango come from; tango-culture relationship; the origin and the evolution of Argentine tango; spreading of the dance to Europe and the world; the effects of tango on economic crisis and political changes in the world.

ART225 - Introduction to Classical Guitar (3 + 0) 4

Fundamentals of music; notes, rhythm and fundamental music vocabulary; notes on the guitar, diagrams.

ART226 - World Music Cultures (3 + 0) 4

The characteristics of music in the major regions of the world and its handling in the context of geographical, cultural, religious, social, economic and political factors.

ART227 - Opera History (3 + 0) 5

The major operas with similar and different features in the music writing language of their composers; the messages of the operas in the context of geographical, cultural, religious, social, economic and political factors.

ART228 - Music in Business Life (3 + 0) 5

Making business life skills more effective through music

ART235 - Polyphonic Chorus (3 + 0) 4

In this course, correct breathing, voice production and dissemination are intended to gain the right skills.It aims to gain the habit of synchronized voice and choral works.

ART251 - Watercolour Painting (3 + 0) 4

Basic knowledge of watercolour painting art and its history; watercolour techniques, tools and materials; demonstration of some real watercolour painting samples; basic principles and practice of painting techniques.

ART252 - Free Ceramic Forming (3 + 0) 4

The ceramic clay; using clay for freehand forming; creating unique ceramic forms without restricting the individual creativity; creating two- or three-dimensional free-form designs using the ceramic clay.

ART261 - Screenplay (3 + 0) 4

Basic information about movie script and its theories; creating a synopsis treatman and a scenario based on original or adopted stories.

ART262 - Traditional Tile Decoration and Modern Interpretations (3 + 0) 4

Tile technique, traditional and modern motifs or figures, application of motifs on biscuit material.

ART264 - Interior Design of Sculpture (3 + 0) 4

Shape elements, point-line-surface relation, drawing techniques, form-shape, measure-ratio, light-dark, shadow-light, volume information, texture types and touch.

ART265 - Creativity in Business Life (3 + 0) 4

Methods of creativity; using creativity in business life; overview and critique of the sector; new approaches by means of art; innovation.

ART266 - Jewelry Design (3 + 0) 4

Shape elements, point-line-surface relation, drawing techniques, form-shape, measure-ratio, light-dark, shadow-light, volume information, texture types and touch; hand tools; production using simple modeling techniques; cutting and leveling techniques, assembly and skidding procedures; design preparation, metal and different material shaping and

ART267 - Theatre (3 + 0) 4

Play staging, play writing, analysis, dramaturgy, acting, stage design, play management.

ART268 - Theatrical Entrepreneurial Skills (3 + 0) 4

Developing entrepreneurial skills through the art of theater.

ART269 - Entrepreneurial World of Contemporary Art (3 + 0) 4

The function and global organisation of contemporary art, which are considered as one of the most important investment tools in the world by international institutions, the socio-economic dimension of the events and the relationship between the world of art: collector, sponsor, and entrepreunership.

ART270 - Entrepreneurship Inspired by Nature: Interdisciplinary Approaches (3 + 0) 5

Biomicicry; the natural processes of sustaining life on earth and using it as a model for social and economic innovations; the integration among the components of ecosystems: living organisms; climate, and the chemical environment;opportunities for innovative entrepreneurship practices with interdisciplinary approaches; the 21st century skills and nature?s principles for innovative and creative entrepreneurship opportunities.

ART271 - Creative Drama (3 + 0) 4

Games and exercises designed by Viola Spolin to stimulate action, relation, spontaneity and creativity of individuals in a group setting; techniques such as warming up games, improvisations, roleplay, writing, story telling etc.

ART282 - Voice Training, Solfage, Correpetition (3 + 3) 4

Correct usage techniques of breathing, diaphragm and voice, professional singing education, excercises of developing musical ear, theoretical knowledge of musical note and rhythm, dictation (be able to writing down on paper in the form of notes and rhythm the heared sound or music), excercises of developing musical ear, working accompanied with

ART284 - Stage Management of Theater and Movie Review (3 + 0) 4

Analysing theater plays that dominated the history of theater in philosophical theme; finding the substances and determine in search of theatric space at the world theater journey, discussion of the predeterminated movies that made the breakthrough in world history within the context of Sartre/Existentialist philosophy and Spinoza/Ethica.

ART285 - Innovative Visual Narrative (3 + 0) 4

Investigation of the visual narration processes through selected examples;preperation of a research report in line with the selected type of visual narration; information about the effectiveness of the visual material or visual narrative on thinking,decision making and personal communication;evaluation;effects of innovative approaches on visual

ART286 - Simple Restoration Techniques in Artworks (3 + 0) 4

General principles and assumptions about artifact repair, simple repairs using different modern materials.

ART287 - Couple Dances (3 + 0) 4

Education of basic music and rhythm, body awareness, movement, coordination, gesture, expression and tendency for couple harmony.

ART288 - Rhetoric: Beautiful and Effective Speaking Art (3 + 0) 4

Expressing thoughts and opinions in the best, most effective and most accurate manner, speaking effectively, and persuading communities.

ART289 - Art of Mosaic (3 + 0) 4

Information about mosaic art and mosaic construction techniques used as an ornamentation element for centuries.

ART291 - Body Language and the Art of Persuasion (3 + 0) 4

Posture, mimic, gesture, a correct and accurate way of using the intonation of speech; leadership skills and abilities to convince or persuade someone to accept a desired way of thinking in the business and social environment; convincing others to adopt new ideas using body language.

ART292 - Sign Language (3 + 0) 4

Developing the ability to communicate daily with hearing disabilities.

ART293 - Architectural Photography (3 + 0) 4

Architectural dynamics in art of photography; photography techniques that are compatible with structures; equipment knowledge and usage techniques.

ART294 - Stage Makeup (3 + 0) 4

Plastic makeup; form working on model; coloration of silicon mold and placing on human face.

ART295 - Classical Turkish Music (3 + 0) 4

Classical Turkish Music; theory and application techniques in traditional, classical and modern periods.

ART297 - Creative Presentation in Digital Arts (3 + 0) 4

3D modeling techniques suitable for 3D product presentation, workflows of multiple software design, scene lighting render and animation settings, editing presentation animation, using render passes layers in compositing and color correction process.

ART298 - Stage Makeup (3 + 0) 4

In line with the course objective and expected learning outcomes, the course will expose students to various aspects of theatrical makeup application for stage, such as historical context, products, tools and techniques.

ASE422 - Computational Aerodynamics (3 + 0) 5

Simplifications to the Navier-Stokes equations;Integral formulation of potential flow equations for inviscid irrotational subsonic flows,panel methods,design optimization with panel methods,inverse airfoil design using a panel code,characteristic lines.Numerical solution of the Transonic Small Disturbance equation using Finite Difference methods in cartesian coordinates;analysis of transonic flows past airfoils.Numerical solution of the Full Potential Flow Equation in curvilinear coordinate sys

ASE424 - Turbulent Flows (3 + 0) 5

Nature of turbulent flow, transport equations, definition of statistical turbulent flows, turbulent flow scales and spectral definition. Introduction to modelling, Direct Numerical Simuation (DNS), Eddy vicous flow model, Reynolds stress and related models, Large Eddy Simulation and experimental techniques in turbulent flows

ASE425 - Introduction to Boundary Layer Theory (3 + 0) 5

General information and governing equations for viscous flows. Laminar boundary layer equations for incompressible flows. Boundary layer separation. Boundary layer on straight wall. Integral momentum and energy equations for boundary layers. Turbulent boundary layer for incompressible flows. Turbulence modelling. Flow separation and control.

ASE426 - Aerodynamic Geometry Optimization (3 + 0) 5

Aerodynamic solvers, definition of optimization problem, one dimensional optimization, multidimensional optimization, constrained optimization.

ASE427 - Helicopter Aerodynamics (3 + 0) 5

Momentum theory and blade element theory in hoover and vertical flight. Rotor types, circular blade motion. Momentum theory and blade element theory in forward flight. Helicopter performance: hoover, vertical and forward flight.

ASE432 - Spacecraft Thermal Control (3 + 1) 5

Introduction to space vehicles. Space thermal environment. Heat transfer principles. Passive and active thermal control hardware. Derivation of conduction and radiation parameters and discretization. Thermal analysis. Thermal test and verification.

ASE462 - Spacecraft Structures (3 + 0) 5

Description and basic definitions,Overview of spacecraft structures,Configuration development,Structural design process,Launch environments and loads,Structural analysis,Materials and manufacturing processes,Structural tests and measurements,Spacecraft mechanisms,Deployable structures,Launch vehicles

ASE471 - Space Engineering (3 + 1) 5

Topics include the introductions to space engineering and fundamentals of mission analysis,requirement definition and space environment. Spacecraft subsystems including structure,thermal control, attitude determination and control, power, command and data handling,payload, telemetry, tracking and command, and communications architecture, and link analysiswill be discussed. Launch and propulsion systems, ground segment and flight operations will beemphasized as well. Manufacturing, integration

CHIN201 - Chinese I (3 + 0) 4

Vocabulary, structure and communicative skills at beginners level; various topics such as countries, nationalities, jobs, family, feelings, food and drink, colors and clothes and daily routines

CHIN202 - Chinese II (3 + 0) 4

Vocabulary, structure and communicative skills at beginners level; various themes such as transport, travel, dates, holidays, money, and shopping.

CHIN301 - Chinese III (3 + 0) 4

More vocabulary, structure and communicative skills at elementary level; various themes such as occupations, hobbies, countries, and functions such as asking for and giving information, offering and responding.

CMPE468 - Machine Learning for Engineers (3 + 0) 5

Artificial intelligence, machine learning, supervised and unsupervised learning, binary classification, multiclass classification, regression, clustering, model evaluation.

CMPE485 - CO_OP Practice III (3 + 0) 4

Participating in software/hardware development projects in IT companies who have a COOP agreement; analyzing the methods and techniques utilized in the company; working in analysis, design and development of a project; preparing a report and presentation of his/her experiences.

CMPE487 - CO_OP Practice IV (3 + 0) 4

Participating in software/hardware development projects in IT companies who have a COOP agreement; analyzing the methods and techniques utilized in the company; working in analysis, design and development of a project; preparing a report and presentation of his/her experiences.

ECON318 - Digital Economy (3 + 0) 6

Dynamics of the digital economy which has become inevitable in everyday transactions; the contemporary use of the predatory innovation and its essential component; algorithms; concrete examples of regulatory challenges in response to escalating tension from relevant markets from various countries.

ECON325 - Economic Indicators and Financial Markets Analysis (3 + 0) 5

Financial literacy, basic concepts of economic indicators, the impact of economic indicators on the financial markets, stock market structure and trading strategies.

ECON442 - Economics of Innovation (3 + 0) 6

The role of science, technology and innovation in economics at the macro and at the micro level; the diffusion and absorption of innovation; issues concerning the measurement of innovation; the national, regional systems of innovation and clusters; the relationship between R&D support mechanisms and economic performance in Turkey.

EE449 - Pattern Classification and Sensor Applications for Engineers (3 + 0) 5

Sensors, general information about sensor types and sensor working principles; what is a pattern; pattern classification applications; theory and methods of pattern classification; feature extraction and selection; MATLAB Classification Learner Tool; analysis and performance of classifiers; RFID basics.

ENE303 - Modeling, Analysis and Simulation (3 + 1) 5

Translational mechanical systems, state-variable equations, inputoutput equations, matrix formulation, block diagrams and computer simulation, rotational mechanical systems, electrical systems, Laplace transform solutions of linear models.

ENE308 - Solar Energy Technology (3 + 1) 5

Introduction to solar energy conversions, fundamentals of solar radiation, methods of solar collection and thermal conversion, solar heating systems, solar thermal power, capturing solar energy through biomass.

ENE312 - Wind Energy Technologies (3 + 1) 5

Wind characteristics, wind energy, wind turbines, design of wind turbines, projecting, planning and economy, wave energy and wave energy conversion systems.

ENE408 - Modeling and Control of Engineering Systems (3 + 1) 5

Laplace transform function analysis; linearization; electromechanical systems; thermal systems; fluid systems; block diagrams and computer simulation; modeling, analysis, and design tools; feedback design

ENE430 - Energy Sytems in Buildings (3 + 0) 5

Building structure, heating, ventilation and air conditioning, the calculation of heat loss and insulation surfaces, water, fuel and electricity consumption in buildings, the national andinternational standards and regulations on energy efficiency in buildings.

FRE201 - French I (3 + 0) 4

Vocabulary, structure and communicative skills at beginners level; various topics such as countries, nationalities, jobs, family, feelings, food and drink, colors and clothes and daily routines.

FRE202 - French II (3 + 0) 4

Vocabulary, structure and communicative skills at beginners level; various themes such as transport, travel, dates, holidays, money, shopping, plans, and life changes.

FRE301 - French III (3 + 0) 4

More vocabulary, structure and communicative skills at elementary level; various themes such as occupations, hobbies, countries, and functions such as asking for and giving information, offering and responding.

FRE302 - French IV (3 + 0) 4

More vocabulary, structure and communicative skills at elementary level; various themes such as travel, places, appearance, plans, health, weather, phone conversations, and cultural elements.

FRE401 - French V (3 + 0) 4

Develop and practice more vocabulary, structure and communicative skills; reporting and passive structures; read newspapers, books, stories and talk about them.

FRE402 - French VI (3 + 0) 4

More vocabulary, structure and communicative skills at pre-intermediate level; various themes such as celebrations, hospital procedures, visiting museums, banks, libraries, and cultural elements.

GER201 - German I (3 + 0) 4

Vocabulary, structure and communicative skills at beginners level; various topics such as countries, nationalities, jobs, family, feelings, food and drink, colors and clothes and daily routines.

GER202 - German II (3 + 0) 4

Vocabulary, structure and communicative skills at beginners level; various themes such as transport, travel, dates, holidays, money, and shopping.

GER301 - German III (3 + 0) 4

More vocabulary, structure and communicative skills at elementary level; various themes such as occupations, hobbies, countries, and functions such as asking for and giving information, offering and responding.

GER302 - German IV (3 + 0) 4

More vocabulary, structure and communicative skills at elementary level; various themes such as travel, places, appearance, plans, health, weather, phone conversations, and cultural elements.

GER401 - German V (3 + 0) 4

More vocabulary, structure and communicative skills at elementary level; various themes such as travel, places, appearance, plans, health, weather, phone conversations, and cultural elements.

GER402 - German VI (3 + 0) 4

More vocabulary, structure and communicative skills at pre-intermediate level; various themes such as celebrations, hospital procedures, visiting museums, banks, libraries, and cultural elements.

HUM105 - Security, Espionage and Intelligence History (3 + 0) 4

The historical development of the concept of security, security problems and threats that differ according to periods, according to a new (critical) understanding; the restructuring of the transformation of espionage and intelligence activities in the history of the world and especially Turkey with globalization.

HUM201 - Social Responsibility Project (3 + 0) 4

Social and environmental problems; non-governmental organizations; cooperation with non-governmental organizations; team work.

HUM202 - Scientific Toy Design (3 + 0) 4

Developing students' using tools and skills in workshops; visiting science museums and science centers, observing large-scale scientific toys, and displaying all designed and produced scientific toys.

HUM204 - Volunteering Studies (1 + 0) 4

Participating voluntarily in the work of aid organizations established within public institutions, local governments and non-governmental organizations in order to support those who face difficulties, especially children, the elderly, the disabled and disadvantaged groups, and sharing what they acquired through the university education.

HUM211 - Gender Studies and Women Rights (3 + 0) 4

Introduction; gender perceptions; woman and health; woman and politics; woman and law; modernism, gender and women rights; types of violence against women and their prevention; woman and literature; woman labor in the global economy; worklife and woman; woman and entrepreneurship; woman and environment.

HUM212 - Gender Equality (3 + 0) 4

This course focused on examine main subjects and current issues of Gender Studies by precisely taking the principle of equality and discrimination at hand, Help students follow gender studies in Turkey and across the globe and develop abilities of students to examine and generate behavioral patterns in their daily social life in a gender-mainstrea

HUM291 - Body Language and Communication Methods (3 + 0) 4

Posture, mimic, gesture, a correct and accurate way of using the intonation of speech; leadership skills and abilities to convince or persuade someone to accept a desired way of thinking in the business and social environment; convincing others to adopt new ideas using body language.

HUM310 - Introduction to Sociolinguistics (3 + 0) 4

Factors contributing to the emergence of social approach to language; language variation and the factors that are responsible for the formation of regional and social variation of languages; various patterns of societal multilingualism and power relationships between/among languages; global trends affecting multilingualism; various political and socio-cultural factors that contribute to language maintenance; various methods used in linguistics research; a fieldwork using research methods.

HUM312 - Studies in Masterpieces of World Literature (3 + 0) 4

Texts selected from major works of world literature such as English, Russian and French: one novel, two short stories, two poems, one play.

HUM316 - Selections from World Literature: The Short Story (3 + 0) 4

Short stories in English selected from a variety of cultures; texts handed out by the course instructor on literary materials and on literary appreciation methods

HUM320 - Aesthetics (3 + 0) 4

Defining art, aesthetics, the beautiful and the ugly, and ethics; scrutinizing their contents; examining the place of aethetics in art and nature; discussing and comparing the views of the philosophers studied.

HUM321 - Introduction to the History of Philosophy (3 + 0) 4

A study of selected philosophers from the times of Ancient, Medieval and Modern Philosophy, 19th Century Philosophy and 20th Century Philosophy.

HUM322 - Introduction to Ethics (3 + 0) 4

Analysing and discussing the central topics of ethics, such as egoism, eudaimonism, utilitarianism, the moral law and the ethics of self-determinism; also, examining the ethical thinking of Plato, Aristotle, Hume, Kant, Mill, Bentham and Sartre.

HUM323 - Introduction to Critical Thinking (3 + 0) 4

Examining and discussing the themes of critical thinking, such as writing and thinking clearly, learning and analysing the types of reasonings and arguments, making rational decisions, learning the types of fallacies; also, exercises to make these topics more understandable.

HUM331 - Go (3 + 0) 4

General description of the game of Go, the rules of Go, the history of Go, Go culture and ethics, Go philosophy, Go in Turkey and in the rest of the world, the opening in Go, ingame strategies in Go.

HUM360 - History of Science (3 + 0) 4

The origins and historical deveopment of modern science and scientific method; the ways of knowing the world of different cultures and societies changed over time; the relationship between scientific knowledge to other enterprises, such as art and religion; the key aspects and issues in the advancement of science from ancient world to modern ages.

HUM412 - Work Accidents and Occupational Diseases (3 + 0) 4

Basic concepts of work accidents and occupational diseases, legal consequences and methods of protection from work accidents and occupational diseases.

IE314 - Project Management (3 + 0) 5

Elements and phases of project management; functions (planning, staffing, scheduling, monitoring, and control) and techniques (CPM, PERT, etc.) of project management; software tools for project management; project cost control and time/resource management; leadership styles, conflict and risk management.

IE322 - Industrial Engineering Practices in Energy Sector (3 + 0) 5

The impact of energy in today?s world; principles of energy planning and utilization; the drives of energy supply and demand; the role of an engineer in energy industries for management, resource planning and utilization; sustainability as a driving force for energy planning; common concepts in energy management; a paradigm of decision making: conventional versus new energy resources including nuclear and renewable energy; economical evaluation of energy investments,

IE428 - Introduction to Systems Engineering (3 + 0) 5

History of technology, determining the real design problem, generating innovative alternatives, and selecting an effective solution; systematic thinking and systematic approach; models and strategies for purposeful activities; decision making in design.

IE443 - Occupational Health and Safety (3 + 0) 5

Basic information on occupational health and safety, principles and legislations, occupational health and safety requirements to be applied in the workplace, occupational accidents, risk assessment and occupational audits; a proactive approach to occupational health and safety.

IE445 - Technology Management (3 + 0) 5

The topics covered a) identifying the strategic issues in technology management (TM); b) identifying the issues in organizing TM functions and related human element ; c) identifying the issues in TM-Activities and Tools d) being able to identify, formulate and solve TM problems.

IE446 - Innovative Products Services and Systems (3 + 0) 5

Innovation, innovative products, services and systems; innovative organizations, products, services and systems or any topic involving design, development and innovation.

IE447 - Technology Entrepreneurship (3 + 0) 5

Technology Entrepreneurship course aims to enable students to learn variety of basic areas and concepts of entrepreneurship including idea generation, business plan creation, venture financing sources, marketing and go to market strategies and to apply the concepts learned through real life cases and a term project.

ISE432 - Innovation and Entrepreneurship in IT (3 + 0) 5

Introduction to entrepreneurship, recognizing opportunities and generating ideas, feasibility analysis, developing an effective business model, industry and competitor analysis, writing a business plan, preparing the proper ethical and legal foundation, assessing a new venture?s financial strength and viability, building a new-venture team, working with disciplinary teams, working with interdisciplinary teams, getting financing or funding.

JAP201 - Japanese I (3 + 0) 4

Vocabulary, structure and communicative skills at beginners level; various topics such as countries, nationalities, jobs, family, feelings, food and drink, colors and clothes and daily routines.

JAP202 - Japanese II (3 + 0) 4

Vocabulary, structure and communicative skills at beginners level; various themes such as transport, travel, dates, holidays, money, shopping, plans, and life changes.

JAP301 - Japanese III (3 + 0) 4

More vocabulary, structure and communicative skills at elementary level; various themes such as occupations, hobbies, countries, and functions such as asking for and giving information, offering and responding.

JAP302 - Japanese IV (3 + 0) 4

More vocabulary, structure and communicative skills at elementary level; various themes such as travel, places, appearance, plans, health, weather, phone conversations, and cultural elements.

KOR201 - Korean I (3 + 0) 4

Vocabulary, structure and communicative skills at A1 level; countries, nationalities, jobs, family, feelings, food and drink, colors and clothes and daily routines.

KOR202 - Korean II (3 + 0) 4

Vocabulary, structure and communicative skills at A1 level; countries, nationalities, jobs, family, feelings, food and drink, colors and clothes and daily routines.

KOR301 - Korean III (3 + 0) 4

This course includes more vocabulary, structure and communicative skills at elementary level. The class activities are grouped around various themes such as occupations, hobbies, countries, and functions such as asking for and giving information, offering and responding.

LAW250 - Information and Technology Law (3 + 0) 4

The examination of legislation related to information law and the evaluation of social processes and tools, current events, court decisions and current problems.

MAN313 - Managerial Skills for the 21 st Century (3 + 0) 5

Self- Management, Personal Financial Management, Time and Stress Management and Organization Skills, Workplace Etiquette/Dress, Ethics, Politics and Diversity, Accountability and Workplace Relationships, Communication and Electronic Communication, Motivation, Leadership and Teams, Conflict and Negotiation, Networking, Job Search Skills, Resume Preparation, Interview Techniques, Career Management

MAN328 - Financial Literacy and Legislation for Entrepreneurs (3 + 0) 5

Tax legislation, business law information and obligations related to legal legislation in start ups, different company and business types and selection principles, interpretation of financial statements (balance sheet, income statement, cash flow statement).

MAN374 - Digital Age and Industry 4.0. (3 + 0) 5

Industry 4.0 components: big data, internet of things, augmented reality, robotic technologies, artificial intelligent, integrated systems, 3D Printer, cloud computing systems.

MAN408 - Introduction to Sustainability (3 + 0) 5

What is sustainability; sustainability and related polices; climate and global change; environmental and resource economics; sustainable business practices; sustainability: ethics, culture, and history; sustainable development; sustainability indicators.

MAN409 - Entrepreneurship (4 + 0) 5

The nature, importance and history of entrepreneurship, the entrepreneurial mind, creativity, innovation and the business idea, marketing and financial planning, franchising, entrepreneurial strategy and strategic management in operations, entrepreneurship background of Turkey, changes in Turkish entrepreneurial features and activities, characteri

MAN412 - Product Development and Brand Management (3 + 0) 5

Concepts of product and brand, classification of products, product strategies, new product development, strategic brand management, brand equity, branding strategies.

MAN414 - Entrepreneurship and Business Plan (3 + 0) 5

Fundamental concepts of entrepreneurship, personal characteristics of entrepreneurs, innovative thinking techniques and types, strategic management and planing, alternative ways of launching a business, business plan and fundamental elements of busines plan, techniques of preparing a business plan, from planning to practice, marketing, production

MAN415 - Contemporary Management Approaches (3 + 0) 5

This course is designed to provide deep knowledge regarding the ways organizations use different and contemporary managerial approaches and practices in order to gain, manage and sustain certain resources and compete within an uncertain environmental conditions.

MAN428 - Brand Management (3 + 0) 5

Definition of a brand, brand name, brand attributes, brand positioning, image building, the difference between brand image and brand identity, sources of brand identity, methods to build brand awareness, brand loyalty, brand association, the relationship between brand equity and customer equity.

MAN437 - Entrepreneurship and Innovation Seminars (3 + 0) 5

Fundamental concepts of entrepreneurship, personal characteristics of entrepreneurs, innovative thinking techniques, barriers of innovation, internal and external factors of entrepreneurship, intrapreneurship, strategic management and planing, alternative ways of launching a business, business plan and fundamental elements of busines plan

MATE458 - Materials for Catalysis and Fuel Cells (3 + 0) 5

Fundamentals of catalysis and catalytic reactors; catalyst synthesis methods; properties of catalytic materials and basics characterization methods; catalyst structure activity relationship fundamentals of electro-catalysis, photo catalysis, different types of fuel cells, and materials used for these applications; existing technology applications; future trends and emerging technologies

MATE460 - Biomaterials (3 + 0) 5

Definition of biomaterial,biocompatibility,host response,synthetic and biological materials,synthetic biomaterial classes,polymers in the body,implant factors,host factors,categories of biomaterial applications,evaluation of biomaterials,historical evaluation of implants,current work in biomaterials, motivation for future directions,current trends.Properties of materials;bulk properties of materials, mechanical properties of materials;comparison of common surface analysis methods;

MATE462 - Nanomaterials (3 + 0) 5

Nanotechnology fundamentals, history, applications and novel materials; synthesis and application of nanomaterials and their application in industry in relation to existing technology applications; future trends and emerging technologies.

ME436 - Fluid Mechanics II (3 + 0) 5

Introduction to differential analysis of fluid motion, continuity, momentum and energy equations, incompressible inviscid flow, velocity potential, stream function, elementary plane flows, dimensional analysis and similitude, incompressible viscous flow, Navier-Stokes equations, boundary layer in laminar and turbulent flow, fluid flow about immerse

ME453 - Heat Exchanger Design (3 + 0) 5

Classification of heat exchangers, basic design methods of heat exchangers (LMTD and epsilon-NTU), forced convection correlations for single-phase heat exchangers, heat exchanger pressure drop and pumping power, fouling of heat exchangers, calculation steps of designing heat exchangers, thermodynamic modeling and analysis of heat exchangers, design and simulation of heat exchangers, students will be asked to complete a design project of heat exchanger.

ME488 - Production Design and Prototyping (1 + 4) 5

Introduction to basic mechanical concepts,mechanical behavior of basic structural elements;introduction to basic materials science and basic manufacturing methods,introduction to mechanical and physical properties of materials;introduction to basic manufacturing processes and casting and material forming; basic design factors(line,figure,color,material,texture,design field,form,value in lighting), ergonomics/anthropometry;meaning in design;design project development by drawing and prototyping.

MECE322 - Multidisciplinary Design in Engineering (2 + 2) 5

An overview of systems engineering (V-Model); engineering design process and methodology; needs assessment; project planning; literature review and patent survey; design criteria and constraints; creativity and idea generation; decision making for idea selection; methods and tools of functional decomposition; product/system architecture; modelling and simulation

MECE422 - Multidisciplinary Engineering Design (2 + 2) 5

Design process and methodology; identification of engineering disciplines, features and importance of multidisciplinary engineering design; systems engineering; need identification and assessment, problem definition; creativity and idea generation; methods and tools of functional/physical/task decomposition; design representation techniques, conceptual modeling of energy, information and material flow in technical systems; idea selection, decision schemes; product architecture

MFGE405 - Rapid Prototyping (3 + 0) 5

Rapid prototyping technologies, CAD models suitable for automated fabrication, secondary processing, additive manufacturing technologies, stereolithography, fused deposition modeling, laminated object manufacturing, selective laser sintering, direct metal laser sintering, casting processes for rapid prototyping, investment casting, rapid tooling, reverse engineering.

MFGE420 - Project Management in Manufacturing (3 + 0) 5

Project management standards;project,portfolio,program and operation management concepts; managing participation,teamwork, and conflict;need identification and assessment,problem definition; creativity and idea generation;methods and tools of functional/physical/task decomposition;mind mapping;planning methods; cost estimation and budgeting;time management and scheduling;project quality management;resource allocation; project risk management techniques; project execution, monitoringtechniques

MFGE481 - Nanofabrication (3 + 0) 5

Fabrication of metallic nanomaterials, manufacturing of carbon based nanostructures, nanostructured systems from low-dimensional building blocks, characterization techniques and manufacturing methods, proximity effect.

MFGE482 - Introduction to CAD/CAM (2 + 1) 5

Introduction to CAD,overview of geometric modeling techniques (wireframes, boundary representation, constructive solid geometry and hybrid modelers), parametric and variation modeling, parametric modeling of curves and surfaces (Bezier, B-spline and NURBS), introduction to CAM, CNC part programming,machining strategies, cutting tool selection, tool path generation, post-processing.

MLY314 - History of Turkish Finance (3 + 0) 5

The linkage between the economic policy and the public budget: general introduction; public revenues and public expenditures in the post-World War I period and during the War of Independance; economic policy and public budget in the 1920's; public budget in times of etatism; economic problems during the World War II and the new taxes; restructur

PR419 - Media Literacy (3 + 0) 4

This course covers the basic concepts and approaches related to sociology. In this sense, starting from the concept of media literacy, important theoretical approaches are examined. Then, violence, gender, representation of minorities are analyzed through different media materials.

PR491 - Journalism I (0 + 3) 5

Definitions and the functions of the concepts and the tools of the journalism; writing texts such as news, articles and interviews; commenting on articles; creating images that will complete the texts; preparing three issues of Atılım Newspaper.

PR492 - Journalism II (0 + 0) 5

Definitions and the functions of the concepts and the tools of the journalism; writing texts such as news, articles and interviews; commenting on articles; creating images that will complete the texts; preparing three issues of Atılım Newspaper.

RUS201 - Russian I (3 + 0) 4

Vocabulary, structure and communicative skills at beginners level; various topics such as countries, nationalities, jobs, family, feelings, food and drink, colors and clothes and daily routines.

RUS202 - Russian II (3 + 0) 4

Vocabulary, structure and communicative skills at beginners level; various themes such as transport, travel, dates, holidays, money, and shopping.

RUS301 - Russian III (3 + 0) 4

More vocabulary, structure and communicative skills at elementary level; various themes such as occupations, hobbies, countries, and functions such as asking for and giving information, offering and responding.

RUS302 - Russian IV (3 + 0) 4

More vocabulary, structure and communicative skills at elementary level; various themes such as travel, places, appearance, plans, health, weather, phone conversations, and cultural elements

RUS401 - Russian V (3 + 0) 4

Vocabulary, structure and communicative skills at pre-intermediate level; up to date topics on newspapers, magazines, and books.

RUS402 - Russian VI (3 + 0) 4

Vocabulary, structure and communicative skills at pre-intermediate level; up to date topics on newspapers, magazines, and books.

SE375 - 3D Modeling, Animation and Game Design (2 + 2) 5

Introduction to modeling bases, an overview of the design of the model, selection of the appropriate modeling technique; transforming the model into simulation and animation; overview of simulation and physics engine; control of model and animation with peripherals; overview of peripherals; interactive project construction with the selection of appropriate peripherals; 3D modeling for 3D printers; artificial organ design with 3D printers; industrial product design with 3D printers;

SE426 - Emerging Technologies (2 + 2) 5

What is an "Emerging Technology", disruptive technologies; identification of disruptive technologies; the 3D printing revolution; the evolution of technology; the nature o innovation; combination and structure; phenomena, domains and problem-solving; origin of technologies; technological revolution; economic revolution; forecasting.

SE446 - Introduction to Bioinformatics (3 + 0) 5

DNA and protein sequence alignment, phylogenetic trees, protein structure prediction, motive findin, microarray data analysis, gene/protein networks.

SPAN201 - Spanish I (3 + 0) 4

Vocabulary, structure and communicative skills at beginners level; various topics such as countries, nationalities, jobs, family, feelings, food and drink, colors and clothes and daily routines.

SPAN202 - Spanish II (3 + 0) 4

Vocabulary, structure and communicative skills at beginners level; various themes such as transport, travel, dates, holidays, money, shopping, plans, and life changes.

SPAN301 - Spanish III (3 + 0) 4

More vocabulary, structure and communicative skills at elementary level; various themes such as occupations, hobbies, countries, and functions such as asking for and giving information, offering and responding.

SPAN302 - Spanish IV (3 + 0) 4

More vocabulary, structure and communicative skills at elementary level; various themes such as travel, places, appearance, plans, health, weather, phone conversations, and cultural elements.

SPAN401 - Spanish V (3 + 0) 4

Vocabulary, structure and communicative skills at pre-intermediate level; up to date topics on newspapers, magazines, and books.

SPAN402 - Spanish VI (3 + 0) 4

Vocabulary, structure and communicative skills at pre-intermediate level; up to date topics on newspapers, magazines, and books.