ECTS - - Civil Engineering Graduate Program with Thesis

Compulsory Departmental Courses

CE589 - Graduation Seminar (0 + 0) 5

Master`s students presentation on thesis work at least one semester prior to thesis defense.

CE597 - Master's Thesis (0 + 0) 80

Research methodologies, requirement analysis, design, progress report.

MDES600 - Research Methodology and Communication Skills (3 + 0) 5

Rigorous, scholarly research, particularly theses or dissertations. Literature review, surveys, meta-analysis, empirical research design, formulating research questions, theory building, qualitative and quantitative data collection and analysis methods, validity, reliability, triangulation, building evidences, writing research proposal

Elective Courses

CE335 - Transportation Engineering (3 + 0) 5

Highway engineering, highway economy, highway geometric elements, horizontal and vertical design; traffic engineering, traffic stream variables, capacity and level of service concepts on rural highways and intersections.

CE402 - Hydrology and Water Resources (3 + 0) 5.5

Principles of hydrology, water resources planning for design and analysis of systems concerned with the use and control of water, storage, water transmission.

CE405 - Design of Dams (3 + 0) 6

Introduction to soil and rock type, earth-fill dams, seepage through dams, rock-fill dams, RCC, arch dams, membrane-faced dams, design of grout curtain, spillways, diversion tunnels and slope stability of dams.

CE406 - Urban Hydraulics (3 + 0) 6

Summary of both pipe and open channel flows, municipal water demands and components, analysis and design of water supply systems, analysis and design of sewerage systems, the storm flow analysis and design of elements of surface drainage systems, detention ponds.

CE407 - Highway Materials and Mixture Design (3 + 0) 6

Physical and chemical properties of asphalts, tests on asphalts, granular materials, sieve analysis and specific gravity of coarse and fine aggregates, Marshall mix design method.

CE410 - Advanced Structural Steel Design (3 + 0) 6

LRFD design of structural steel members, built-up compression members, composite flexural members, seismic design.

CE411 - Design and Construction of Transportation Facilities (3 + 0) 6

Transportation systems, geometric design of transportation facilities based on operational capacity, site constraints, and safety considerations, pavement design and rehabilitation, terminals as components of transportation systems engineering, operations planning and construction of transportation systems.

CE416 - Geotechnical Site Characterization (3 + 0) 6

The sub-surface investigation, standard penetration test, cone penetration test, dilatometer test , Vane shear test, resistivity.

CE417 - Rock Mechanics (3 + 0) 6

Stress and strain analysis, introductory elasticity, mechanical behaviour of rock and rock masses, rock testing, discontinuity deformation and slip, failure, in-situ state of stress, stresses around underground openings, rock mass classification, support design.

CE418 - Slope Stability (3 + 0) 6

Overview of slopes and stability concepts, examples of slope failure, causes of slope failures, review of soil mechanics principles and shear strength of soil: drained and undrained conditions, total and effective stress, drained and undrained shear strength, laboratory and field Testing of earth materials for slope stability.

CE419 - Deep Excavations and Retaining Structures (3 + 0) 6

Introduction to type of retaining walls; importance of site investigations for deep excavations; active and passive pressures acting on the retaining wall; type of support systems like ground anchors, strutted excavations, anchor bulkheads; monitoring of deep excavations; limitations for lateral and vertical displacement of the retaining structures.

CE420 - Tunnelling (3 + 0) 6

Introduction to tunneling: art and engineering; geological aspects of tunneling; tunneling methods: soft ground, rock or adverse ground conditions; ground treatment in tunneling; stresses and displacements associated with excavation of tunnels; design and support of tunnels; application of numerical analysis codes for tunneling.

CE421 - Applied Solid Mechanics (3 + 0) 6

Analysis of stress and strain, stress-strain relation, plane strain and plane stress problems, yield and failure criteria, unsymmetrical bending of beams, energy methods; buckling of columns; plastic behavior of structural members.

CE423 - Structural Optimization (3 + 0) 6

Formulation of structural optimization problems, graphical solution procedure, sizing, geometry, and topology optimization, steepest-descent method, Newton?s method, branch and bound method, multi-objective structural optimization, evolutionary algorithms, sensitivity analysis techniques, and practical applications.

CE425 - Construction Planning and Cost Estimating (3 + 0) 6

Introduction to construction project management, tendering process, public procurement law, public procurement contract law, tender documents, cost engineering and quantity surveying, contractor`s bid price, progress payments, and taking-over and performance certificates.

CE429 - Irrigation and Drainage (3 + 0) 6

Determination of irrigation module for the irrigation field, determination of irrigation water discharge, uniform flow in open canals, uniform flow in pipeline, open canal design, pipe irrigation system design.

CE430 - Construction Engineering and Management (3 + 0) 5.5

Contracting and biding, planning and scheduling, estimating and project control, productivity models and construction econometric and an introduction to construction machinery engineering fundamentals description, types, selection criteria and output cost analysis of basic construction equipment.

CE437 - Structural Dynamics (3 + 0) 6

Dynamics of lumped mass systems (single- and multi-degree of freedom systems); free vibration; response to harmonic and periodic excitations; response to impulsive excitations; response to general dynamic loading; earthquake response of linear elastic and inelastic structures; generalized single-degree-of-freedom systems; modal analysis; response history analysis; response spectrum analysis.

CE438 - Prestressed Concrete Fundamentals (3 + 0) 6

Introduction to prestressing, prestress losses, flexural analysis and design, composite construction, shear, torsion, deflections.

CE440 - Earthquake Engineering (3 + 0) 6

Seismic ground motion, introduction to earthquakes, causes of earthquake, seismic waves, factors affecting earthquake motion at a site, prediction of motion at a site, recording and processing of earthquake ground motion; single degree of freedom systems, formulation of the equation of motion, free vibration analysis.

CE442 - Advanced Materials of Construction (3 + 0) 6

Mechanical and durability properties of construction materials, properties and microstructure of concrete in fresh and hardened state, microstructure, types and various aspects of steel, plastics and composites in construction, innovative materials of construction and the interaction of construction materials with the environment.

CE443 - Advanced Concrete Materials (3 + 0) 6

Cement, aggregates and admixtures for concrete, properties of concrete in fresh and hardened state, types and various aspects of concrete, durability characteristics of concrete, future of concrete studies and the interaction of concrete with the environment.

CE444 - Analysis of Framed Structures (3 + 0) 6

Analysis of discrete member systems, displacement and force methods of analysis, direct stiffness method, static and kinematic condensation, substructure analysis.

CE447 - Computer Aided Analysis and Design in Structural Engineering (3 + 0) 6

Introduction to Excel and Visual Basic, introduction to Excel and Visual Basic programming, programming in excel, design of reinforced concrete beams, design of reinforced concrete columns, deflection of reinforced concrete beams, design of steel beams, design of steel columns, introduction to SAP2000, use of Excel and SAP2000 simultaneously.

CE449 - Computer Aided Analysis and Design of Reinforced Concrete Structural Members (3 + 0) 6

Material properties, moment curvature relationships of beams, serviceability, ductility of beams, slender columns, two-way slabs, biaxial bending of columns, punching shear, behavior under shear and torsion, seismic design principles.

CE454 - Computer Applications in Geotechnical Engineering (3 + 0) 6

Definition geotechnical problems, preliminary studies and design consideration in geotechnic, FEM, Plaxis, exercises and case studies are based on the Plaxis computer programs, preparation of on geotechnical problems solving project by Plaxis.

CE456 - Design and Construction of Tall Building Systems (3 + 0) 6

Overview of design philosophy and selection of the structural systems for tall buildings; criteria and loadings; structural modeling and analysis; structural and foundation design; fire safety engineering; construction planning and management of tall building projects.

CE464 - Construction Scheduling and Cost Control (3 + 0) 6

Introduction and some advanced studies in a computer application like MS Project, extensively used for construction scheduling and cost control; time extension clauses in international construction contracts; cause-effect relationship to prove construction claims.

CE470 - Open Channel Hydraulics (3 + 0) 6

Uniform flow in open channel, gradually varied flow in open channels, rapidly varied flow in open channels, sediment transport in open channels.

CE471 - Integrated Coastal Zone Management (3 + 0) 6

Definition of coastal zone and its physical and ecological properties, coastal landforms, the global ocean and the climate system, coastal processes, coastal structures, pressures on the coast, coastal pollution, sustainability, integrated coastal zone management (ICZM) and ICZM in Turkey.

CE473 - Coastal Hydraulics (3 + 0) 6

Small amplitude wave theory, non-linear wave theories (Stokes, Cnoidal), the solitary wave theory, water particle kinematics, wave transformations, wave height distribution and wave spectrum.

CE479 - Applied Water Resources Engineering (3 + 0) 6

Introduction to water resources projects and most commonly used hydraulic structures, reservoirs, capacity determination of reservoirs, planning and construction of dams, dam types, design of dams, stability analysis of dams, spillway types, stilling basin types, hydroelectric power plant types, hydroelectric power/energy calculation, turbines.

CE505 - Design of Dams (3 + 0) 5

Introduction to soil and rock type, earth-fill dams, seepage through dams, rock-fill dams, rcc, arch dams, membrane-faced dams, design of grout curtain, spillways, diversion tunnels and slope stability of dams.

CE506 - Urban Hydraulics (3 + 0) 5

Summary of both pipe and open channel flows, municipal water demands and components, analysis and design of water supply systems, analysis and design of sewerage systems, the storm flow analysis and design of elements of surface drainage systems, detention ponds.

CE507 - Highway Materials and Mixture Design (3 + 0) 5

Physical and chemical properties of asphalts, tests on asphalts, granular materials, sieve analysis and specific gravity of coarse and fine aggregates, Marshall mix design method,

CE508 - Computer-Aided Highway Design (3 + 0) 5

Introduction to MicroStation CAD platform, introduction to InRoads platform, digital terrain model and point types symbology and feature creation for DTM, horizontal alignment and profile extraction, vertical alignment, typical cross sections, roadway modeling, superelevation, final evaluation of the course.

CE510 - Advanced Structural Steel Design (3 + 0) 5

LRFD design of structural steel members, built-up compression members, composite flexural members, seismic design.

CE511 - Design and Construction of Transportation Facilities (3 + 0) 5

Transportation systems, geometric design of transportation facilities based on operational capacity, site constraints, and safety considerations, pavement design and rehabilitation, terminals as components of transportation systems engineering, operations planning and construction of transportation systems.

CE512 - Principles of Geographic Information Systems (2 + 2) 5

Geographic information systems (GIS) technologies as a variety of geospatial data including remotely sensed imagery from the satellites, the basic concepts, software used and available data types used by GIS, exploration of geospatial data and the construction of cartographic products.

CE515 - Analysis and Design of Flexible and Rigid Pavements (3 + 0) 5

Introduction to Pavement Design,Stresses and Strains in Different type of Pavements,Traffic Loads and Analysis,Pavement Materials and Properties,Structural Design of Pavements

CE516 - Geotechnical Site Characterization (3 + 0) 5

Course covers the sub-surface investigation, standard penetration test, cone penetration test, dilatometer test , Vane shear test, resistivity.

CE517 - Rock Mechanics (3 + 0) 5

Stress and strain analysis, introductory elasticity, mechanical behaviour of rock and rock masses, rock testing, discontinuity deformation and slip, failure, in-situ state of stress, stresses around underground openings, rock mass classification, support design.

CE518 - Slope Stability (3 + 0) 5

Overview of slopes and stability concepts, examples of slope failure, causes of slope failures, review of soil mechanics principles and shear strength of soil: drained and undrained conditions, total and effective stress, drained and undrained shear strength, laboratory and field testing of earth materials for slope stability.

CE519 - Advanced Structural Analysis (3 + 0) 5

Principle of Virtual Work, force method of analysis, displacement method of analysis, special techniques in analysis of structures with stiffness method, introduction to finite element method.

CE521 - Applied Solid Mechanics (3 + 0) 5

Analysis of stress and strain, stress-strain relations, plane strain and plane stress problems, yield and failure criteria, unsymmetrical bending of beams, energy methods, buckling of columns, plastic behavior of structural members.

CE522 - Tunnelling (3 + 0) 5

Introduction to tunneling: art and engineering, geological aspects of tunneling, tunneling methods: soft ground, rock or adverse ground conditions, ground treatment in tunneling, stresses and displacements associated with excavation of tunnels, design and support of tunnels, application of numerical analysis codes for tunneling.

CE523 - Optimization in Civil Engineering (3 + 0) 5

Formulation of Optimization Problems; Classification of Optimization Problems; Traveling Salesman Problem; Geotechnical, Hydraulic and Water Resources, Transportation, Structural, Project Management Applications of Optimization.

CE524 - Structural Systems (3 + 0) 5

The classifications of structural systems, loads acting on structural system, structural requirements, reinforced concrete structures, steel structures, masonry structures, timber structures, composite structures.

CE525 - Construction Planning and Cost Estimating (3 + 0) 5

Introduction to construction project management, tendering process, public procurement law, public procurement contract law, tender documents, cost engineering and quantity surveying, contractor`s bid price, progress payments, and taking-over and performance certificates.

CE527 - Earthquake Engineering (3 + 0) 5

Seismic ground motion, introduction to earthquakes, causes of earthquake, seismic waves, factors affecting earthquake motion at a site, prediction of motion at a site, recording and processing of earthquake ground motion, single degree of freedom systems, formulation of the equation of motion, free vibration analysis.

CE529 - Irrigation and Drainage (3 + 0) 5

Determination of irrigation module for the irrigation field, determination of irrigation water discharge, uniform flow in open canals, uniform flow in pipeline, open canal design, pipe irrigation system design.

CE533 - Design of Coastal Structures (3 + 0) 5

Introduction to coastal engineering, wave parameters and classification, wave transformation, wave generation and statistical analysis, design wave selection, wave-structure interactions, design of harbor structures, coastal sedimentation, design of shore protection structures, planning and design of coastal structures in Turkey.

CE534 - Advanced Transportation Engineering (3 + 0) 5

Safe road design principles, blackspot analysis, safety auditing on planned projects and on existing roads, the conflict technique.

CE535 - Advanced Traffic Engineering (3 + 0) 5

Speed, volume and density relationship, measuring methods of basic traffic stream variables, geometric design for traffic, capacity and level of service analysis of expressways, divided and two-lane highways, accident analysis.

CE542 - Advanced Materials of Construction (3 + 0) 5

Mechanical and durability properties of construction materials, properties and microstructure of concrete in fresh and hardened state, microstructure, types and various aspects of steel, plastics and composites in construction, innovative materials of construction and the interaction of construction materials with the environment.

CE543 - Advanced Concrete Materials (3 + 0) 5

Cement, aggregates and admixtures for concrete, properties of concrete in fresh and hardened state, types and various aspects of concrete, durability characteristics of concrete, future of concrete studies and the interaction of concrete with the environment.

CE550 - Prestressed Concrete Fundamentals (3 + 0) 5

Introduction to prestressing, prestress losses, flexural analysis and design, composite construction, shear, torsion, deflections.

CE554 - Computer Applications in Geotechnical Engineering (3 + 0) 5

Definition of geotechnical problems, Preliminary studies and design consideration in geotechnics, finite element method, Plaxis, exercises and case studies are based on the Plaxis computer programs, solving geotechnical problems by Plaxis.

CE556 - Design and Construction of Tall Building Systems (3 + 0) 5

Overview of design philosophy and selection of the structural systems for tall buildings, criteria and loadings, structural modeling and analysis, structural and foundation design, fire safety engineering, construction planning and management of tall building projects.

CE563 - International Construction Contracts (3 + 0) 5

Legal and contractual terminology in construction contracts, EPC and PC contracts, structure and breakdown of standard construction contracts, contractual documents, standard provisions as to the time of contract, cost of contract and advanced payment, provisions regarding the quality and acceptance of construction work completed.

CE564 - Construction Scheduling and Cost Control (3 + 0) 5

Introduction and some advanced studies in a computer application like MS Project, extensively used for construction scheduling and cost control, time extension clauses in international construction contracts, cause-effect relationship to prove construction claims.

CE565 - Project Risk Management (3 + 0) 5

Introduction to risk, risk analysis and management, risk identification, risk assessment methods, probabilistic risk assessment, Monte Carlo Simulation, sensitivity analysis, risk response strategies.

CE566 - Advanced Mathematical Methods in Civil Engineering (3 + 0) 5

First-, second- and higher-order linear ordinary differential equations, system of differential equations, power series solution of differential equations, Laplace transforms, partial differential equations, numerical integration and derivation, numerical solution of differential equations.

CE567 - Computer Aided Analysis and Design in Structural Engineering (3 + 0) 5

Introduction to Excel and Visual Basic, Excel and Visual Basic programming, fundamentals of Excel, database and pivot tables, design of reinforced concrete beams, design of reinforced concrete columns, userforms, analysis of reinforced concrete beams, design of steel beams and columns, introduction to SAP2000, simultaneous use of Excel with other p

CE570 - Open Channel Hydraulics (3 + 0) 5

Uniform flow, gradually varied flow, rapidly varied flow, and sediment transport in open channels.

CE571 - Integrated Coastal Zone Management (3 + 0) 5

Definition of coastal zone and its physical and ecological properties, coastal landforms, the global ocean and the climate system, coastal processes, coastal structures, pressures on the coast, coastal pollution, sustainability, integrated coastal zone management (ICZM) and ICZM in Turkey.

CE573 - Coastal Hydraulics (3 + 0) 5

Small amplitude wave theory, non-linear wave theories (Stokes, Cnoidal), solitary wave theory, water particle kinematics, wave transformations, wave height distribution and wave spectrum.

ENE404 - Energy and Environment (3 + 0) 5

Energy resources, processes, environmental effects, air pollution, sustainability, global warming, climate change.

IE441 - Optimization in Data Analytics (3 + 0) 5

The concept of linear algebra, probability, linear programming, integer programming, mixed-integer programming, and non-linear programming applications in data analytics such as regression, classification, neural networks; introduction to Python programming and using different Python programming packages to solve data analytics problems.

IE442 - Statistical Applications in Industrial Engineering (3 + 0) 5

Applications of simple and multiple linear regression, design and analysis of experiments, multivariate analysis and nonparametric tests for the solution of industrial engineering problems.

IE503 - System Analysis and Design (3 + 0) 5

Requirements engineering and modeling, structural modeling, system architecture and user interface design, documentation, testing and installation, traceability, project planning and management.

ME684 - Finite Element Analysis of Solids and Fluids I (3 + 0) 5

Concepts of finite element analysis such as principle of virtual work, finite element solution procedures, heat transfer analysis, finite element analysis of solids, fluids and structures.

SE427 - Blockchain and Cryptocurrency Technologies (2 + 2) 5

Introduction.Blockchain Basics.Consensus Algorithms.Cryptography Fundamentals.Blockchain Networks. Blockchain Programming. Blockchain Transactions, Mining, and Wallets. Smart Contracts. Cryptocurrencies. Blockchain Applications. Decentralization. Blockchain Security. Legal Aspects, Finance, and Economy. Future of Blockchain Technologies.

SE550 - Software Engineering (3 + 0) 5

Introduction to software engineering and related topics; software process and project metrics; project planning; scheduling and tracking; configuration management; software quality assurance; requirement analysis; data flow diagrams and related topics; design concepts and methods; implementation; testing methods and test strategies; object-oriented

SE573 - Applied Machine Learning in Data Analytics (3 + 0) 5

Data statistics; linear discriminant analysis; decision trees; artificial neural networks; Bayesian learning; distance measures; instance-based and reinforcement learning; clustering; regression; support vector machines.